FlySky FS-TH9X Antenna Wire Disconnected

Scritto Da: Heath Soucheck
  • Commenti: 0
FlySky FS-TH9X Antenna Wire Disconnected

Difficoltà

Moderate

Passi

7

Tempo Necessario

Nessuna stima

Introduzione

The antenna wire could have come out and disconnected from the motherboard. Carefully connect the socket on the motherboard to the connector on the wire.

  1. 3Ip6hWjXIFW1lLMT

    • On the back of the remote, locate the antenna box labeled in red.

  2. LTePZZDSfZIZZcfJ

    • Unplug the wire that connects the antenna box to the controller.

  3. yVCxn1UOMpjhJetq

    • On either side of the box, squeeze the clips and pull up to release the antenna box away from its socket.

  4. aTLaQfQw6tnSGeVG

    • Unscrew the two 2.5 mm Phillips #1 screws with a screwdriver and carefully remove the front plate.

  5. mSgHmYebJQEH6kII

    • Once you remove it, you will see a wire that is connected to the antenna, and a motherboard.

  6. LedLnoFaYbMmuPcs

    • Locate the brass colored socket and the end of the wire and carefully connect them together.

    • It should click together.

  7. DIOCCvKwIhXMAZp1

    • Once connected assemble the box back together.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Heath Soucheck

Membro da: 09/02/23

715 Reputazione

0 commenti