FlySky FS-TH9X Disassembly

Scritto Da: Heath Soucheck
  • Commenti: 0
FlySky FS-TH9X Disassembly

Difficoltà

Easy

Passi

4

Tempo Necessario

1 minuto

Introduzione

To access and fix any damages with the FlySky FS-TH9X remote, the first step to disassemble the remote, is to remove the six screws in the back. Getting access into the internals of the remote. Using this guide you are able to complete your first steps to fixing your remote.

  1. smdCsCktuECcFPRb

    • On the back of the remote, you will see 6 5mm Phillips #2 head screws.

    • The six screws on the front of the remote are screws that disconnect the joysticks from the remote and cannot be used to remove the back panel.

  2. CNkZvlxoIpfgunBW

    • Using a size two Phillips screwdriver, remove the six 5 mm Phillips #2 head screws

  3. tQOMeSSNrXwYnPK4

    • Using a pry tool with a little pressure, carefully pull apart the remote to expose the inside.

  4. XU1bpkHfkrivbsKE

    • Continue to troubleshooting your device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Heath Soucheck

Membro da: 09/02/23

715 Reputazione

0 commenti