Game Boy Color LCD Ribbon Cable Replacement

Scritto Da: Nick Katsantones
  • Commenti: 3
Game Boy Color LCD Ribbon Cable Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

5 minuti

Introduzione

Removing the ribbon cable provides unhindered access to the inner workings of the Game Boy Color.

  1. c3LIxTjWvUGxcYZu
    c3LIxTjWvUGxcYZu
    oYIXQjPFhQsYx4cb

    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. uFQGYmIMX2PCiLaG

    • Remove the batteries from the battery compartment.

  3. DsXcimKolb1pBNXH

    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    I did this with a Y0 bit. It works if you are careful. I wouldn't recommend it on other consoles but for this tiny thing, it works.

    phnome -

    The guide says a Y0 is needed. Is it a Y1 or Y0?

    Trav -

  4. RrHNVnA1jYSYLAMJ
    RrHNVnA1jYSYLAMJ
    aFVfBIhWWKMpEAKh

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

  5. QLlb11byBHORVS6F

    • Push up on the tabs on either side of the ribbon with a spudger.

  6. qhFGO3C1pCyNBJNl

    • Gently remove the ribbon cable from the port

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Nick Katsantones

Membro da: 18/01/13

937 Reputazione

Un commento

How many pins are in the ribbon?

jakebrown199 -