GameSir T4 Pro Battery Replacement

Scritto Da: Madison Puckett
  • Commenti: 3
GameSir T4 Pro Battery Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

5 minuti

Introduzione

Use this guide to remove the battery from your GameSit T4 Pro controller. All you need for this repair is a Phillips #1 screwdriver and the iFixit opening tool. For the battery replacement, this controller requires a 600 maH battery. Complete this repair guide before continuing to the other repair guides.

  1. EKYDuOuhGH3IVs2m

    • Using the Phillips 1 screwdriver, gently turn the screw to the left (repeat this step until all four screws are taken out).

  2. Z253w1hw1YAOjJxm

    • Use your iFixit opening tool to break the seam of the back of your controller.

    • Be careful when pulling apart, as the charging port wires are connected to both sides of the controller.

  3. jUg1fYhBZi5jeRCv

    • Using the plastic spudger, wiggle the connection out of place.

  4. eFTIEf6Ls2hFPq6f

    • Apply a slow, but consistent pull to the old 600 maH battery.

    • Attach new battery onto the pad

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Madison Puckett

Membro da: 16/09/22

755 Reputazione

3 commenti

Battery Model is pl502450 600mah

3.7v

Eugene Eugenio -

Where can I buy this battery? Do You have a link to it?

Roberto Barros -

Where can I buy this battery?

Roberto Barros -