Introduzione
Strumenti
-
-
Open the controller by unscrewing the screws located on the back panel
-
Separate the two halves of the controller.
-
-
-
Remove the rumble-pack by unscrewing the screws located on on either side.
-
Remove the rumble pack to fully separate the two halves of the controller
-
-
-
Disconnect the motherboard from the front half of the controller by unscrewing the small screws around its perimeter.
-
The motherboard should separate and lift right out from the front half.
-
Conclusione
To reassemble your device, follow these instructions in reverse order.
