Introduzione
This guide requires the removal of 1x5mm screws on the USB/SD card assembly.
Strumenti
Ricambi
- 
                  
                  
- 
            
Flip the laptop with the base of the laptop is facing you.
 - 
            
Using the #00 screwdriver, unscrew these screws.
 
 - 
            
 - 
                  
                  
- 
            
Start from the top right corner of the laptop and work clockwise with an iFixit opening tool or spudger to pry the keyboard from the frame of the laptop.
 
 - 
            
 - 
                  
                  
- 
            
Gently pull the keyboard in the opposite direction of the screen, so the wires beneath are exposed.
 - 
            
Lift the black flap and pull the blue ribbon gently towards you until it is disconnected.
 - 
            
Lift the white flap and pull the blue ribbon towards you until it is disconnected.
 
 - 
            
 - 
                  
                  
- 
            
Undo the black tape located on the bottom from the frame of the laptop.
 - 
            
Using fingers or the spudger, slide out the black connector indicated on the left.
 - 
            
Use a #00 screwdriver to remove the two screws.
 
 - 
            
 - 
                  
                  
- 
            
Remove the screw.
 - 
            
Use your fingers to pull the white tab out of the black slot above the battery.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.