HP Pavilion 14-bk061st Back Panel Replacement

Scritto Da: Mehrab Daemi

Commenti: 1

HP Pavilion 14-bk061st Back Panel Replacement

Difficoltà

Easy

Passi

Tempo Necessario

4 - 5 minuti

Introduzione

This is the guide to removing the back panel to the HP Pavilion 14-bk061st.

The back cover’s purpose is to close up the device and stop debris from entering and possibly damaging the critical components of the device. If the back cover is broken, be very careful when moving the device as debris may easily enter and damage the laptop’s components, leading to a costly repair.

Strumenti

Passo 1

Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.

Passo 2

Unclip the back plate using a plastic opening tool.

https://www.youtube.com/watch?v=xXhVP0Un... This video helped a little. It is very hard to pry the left or right side away as the manual says. The video shows lifting from the center of the back. This bows the lid and consequently pulls the left and right sides inward slightly. I enhanced this movement by pushing inward from the right and left sides with my thumb while pulling up from the center of the back panel. This popped open the clasps on the right. Lifting the right back corner and pulling to the right, I got the clasps on the left to disengage. Once the clasps on the left and right towards the back came loose, the rest was far less stubborn.

Bill Jacobs -