HP Spectre x360 13-aw0xxx Speaker Replacement

Scritto Da: Maxwell Francesco
  • Commenti: 0
HP Spectre x360 13-aw0xxx Speaker Replacement

Difficoltà

Moderate

Passi

7

Tempo Necessario

20 - 40 minuti

Introduzione

If the speakers on your HP Specter laptop are not working use this step by step guide to show you how to remove and replace them.

  1. kduPsBpHAGi2wfqo
    kduPsBpHAGi2wfqo
    ereKkyBUu1xQdZl2

    • Use two opening tools, one on either side of the battery plug, to slowly pull the plug straight out of its port.

    • Alternatively, use your fingernails.

  2. JXlIdePWOILhNsIj
    JXlIdePWOILhNsIj
    lkLTEES1kmY2TNdh

    • Use a Phillips #00 screwdriver to remove the six 2.5 mm screws securing the battery.

  3. nHlaXih4TUpXY1DB
    nHlaXih4TUpXY1DB
    JjK5cSaFTCPwpVn3

    • Carefully lift the edge of the battery with an opening tool.

    • Lift the battery up and out.

  4. 6VW2hGAyMJSvBOBW
    6VW2hGAyMJSvBOBW
    yyHVtFaVw3LRm3AG

    • Remove the 3 mm Phillips screws on the speaker(s) you wish to replace.

  5. tHeeSuNU6fZREpaa
    tHeeSuNU6fZREpaa
    NsUkHkXeYHBQBVSV

    • Remove the two 2 mm Phillips #00 screws located under the battery.

    • Repeat for the other speaker if necessary.

  6. FTjhq6bXOE2yLEkO
    FTjhq6bXOE2yLEkO
    mPD2dBtUr1D4nSM2
    D3hqLioiLHiCijmn

    • Use a small pry tool to lift up and disconnect the speaker cable from the motherboard.

  7. lXaEydU5hCyhYcyH
    lXaEydU5hCyhYcyH
    owVIOffDpmLpN2od

    • Using the same pry tool lift up on the speaker housing and remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Maxwell Francesco

Membro da: 14/02/23

575 Reputazione

0 commenti