HP Stream 13-c002dx Keyboard Replacement

Scritto Da: Matthew Dodge
  • Commenti: 0
HP Stream 13-c002dx Keyboard Replacement

Difficoltà

Moderate

Passi

2

Tempo Necessario

10 - 20 minuti

Introduzione

Whether you want to replace a faulty keyboard, or you simply seek to change the look of your notebook, this easy-to-follow guide will instruct you on gaining internal access to the HP Stream 13-c002dx in only two steps.

  1. eaKDlXHAT1ZiRWaT
    eaKDlXHAT1ZiRWaT
    rTQEgMpby36HHZod

    • Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.

    • Flip the laptop over so the bottom is facing up.

    • Use your Phillips #0 screwdriver to remove the eleven visible 5 mm screws on the back of the laptop.

    • There are some screws underneath the rubber feet. Use a spudger to remove them and gain access.

    • Unscrew the two remaining 2.5mm screws. Keep these screws separate from the first eleven 5mm screws.

  2. HetPGCBDaoXC1fVG
    HetPGCBDaoXC1fVG
    m3hNwoutDAfWs3hV
    dNx3MCT3TcvkMuSx

    • Flip the laptop back over so it's right side up and open the screen.

    • Using a spudger, separate the keyboard surface from the bottom of the laptop.

    • While lifting the keyboard surface from the bottom, you will notice three cables still attaching them together. Gently unplug each of these cables from the motherboard.

    • Remove the keyboard assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Matthew Dodge

Membro da: 23/01/18

416 Reputazione

0 commenti