Introduzione

This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.

Strumenti

  1. CMfeRLWyrPuakq5u
    CMfeRLWyrPuakq5u
    FKShZ1MfQUaLeDUF
    • Conductive tape attaches the left edge of the heatsink shield to the heatsink.

    • Heat the tape with a heat gun or hair dryer to soften its adhesive.

    • Use tweezers or your fingers to remove the tape.

    • During reassembly, apply the tape in the same location it came from. Reheat the adhesive if the tape doesn’t stick well to the heatsink at first.

Spencer Day

Membro da: 14/09/22

48838 Reputazione

0 commenti