Hitachi CP-X2511 Fan Replacement

Scritto Da: SeanB
  • Commenti: 0
Hitachi CP-X2511 Fan Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

Nessuna stima

Introduzione

If your Hitachi CP-x2511 is overheating, you should check the fan. If the fan is not working before you start looking for a new one, make sure that the wires connected to the fan is plug in. If it's not the wires, then to get to the fan you must take out the battery since the fan is behind it.

  1. YLgwmLeKnIG4KsP3

    • To get to the fan you must take out the screws that are holding in the power source.

  2. LMlLOmo2RYr6HtQ1
    LMlLOmo2RYr6HtQ1
    KbvYoXiUGbLqBxWg
    FSntLEHfKXSL1ZwR

    • You must make sure all screws are out and wire are unplug.

  3. mGfJVMakErdMTyWR
    mGfJVMakErdMTyWR
    5yPXftZefU1MCOCv

    • Once unscrewed it is easy to slide out the fan and power source to replace.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

SeanB

Membro da: 08/09/23

97 Reputazione

0 commenti