Introduzione
Strumenti
Ricambi
- 
                  
                  
- 
            
using your scissors, carefully cut through the fabric just enough so you can remove it from the speaker's body.
 
 - 
            
 - 
                  
                  
- 
            
using your screwdriver, remove the 8 screws that are holding the speaker's body together.
 - 
            
using your spludger, carefully pry into the base.
 
 - 
            
 - 
                  
                  
- 
            
using your screwdriver, remove the 6 screws that are holding the speaker in place.
 - 
            
using the spludger, carefully pry under the speaker to get it out.
 
 - 
            
 - 
                  
                  
- 
            
carefully using 2 fingers, remove both of the connectors that connect to the speaker from the motherboard.
 
 - 
            
 
                            
                            Conclusione
                          
                          To reassemble your device, follow these instructions in reverse order.