Hoover Windtunnel Air Steerable Upright Belt Replacement

Scritto Da: Sangmin Jung
  • Commenti: 1
Hoover Windtunnel Air Steerable Upright Belt Replacement

Difficoltà

Very easy

Passi

4

Tempo Necessario

5 minuti

Introduzione

Damaged belt may be the reason for the vacuum not picking up debris properly. This guide will show you how to open the bottom plate of the machine and replace the belt underneath.

  1. kWKSyDOW1mxWMPM1
    kWKSyDOW1mxWMPM1
    6AHNfG4cii52k2GG
    f3QgKQkTIEQ2ZuMt

    • Unplug power cord before you begin.

    • Remove the 4 phillips 3/4'' screws.

  2. QaUbVtMO3ppwkFp3
    QaUbVtMO3ppwkFp3
    5d5xebVEWP5hWhmI

    • Lift off the plate.

  3. 1rF6F1wJtF1YenXb
    1rF6F1wJtF1YenXb
    bNCH4UNeaGXbUNgZ

    • Separate the belt from the brush roll.

  4. WmMOisdi1iL225FS
    WmMOisdi1iL225FS
    U1HJs4EJrPX2RxAa
    aIuUVoiVvCUOKVuu

    • Remove the belt from the gear.

Conclusione

To reassemble your device, follow these steps in reverse order.

Autore

Sangmin Jung

Membro da: 27/09/17

201 Reputazione

Un commento

That isn’t the steering belt. That is the agitator belt.

Lynn Brown -