How To Mount Raptor Hotend PCB On The DDX

Scritto Da: AJ Pereira
  • Commenti: 0
How To Mount Raptor Hotend PCB On The DDX

Difficoltà

Moderate

Passi

4

Tempo Necessario

Nessuna stima

Introduzione

  1. dtU5H3LWidCkjfwe

    • Remove the 2 Phillips screws

  2. FGNqwJX4EvFtGwpn

    • Mount the printed PCB Mount with the 2 included M3x25 socket head screws

  3. UG2LrnJs2oZemPoy

    • Attach the PCB with the 4x#4 self-tapping screws

  4. 3xKIKNP2U4oe5HMW
    3xKIKNP2U4oe5HMW
    cxnsu26qbppseOKy

    • Picture 1 is for a Raptor 2. Picture 2 is for a Raptor 1

    • Filament sensor Note Raptor 1 Does not have a Filament sensor

    • Extruder motor

    • BL Touch 3 and 2 Pin connections

    • Hotend Heater Cartridge

    • Thermistor

    • 4010 Hotend Heatsink Fan

    • Cooling Part Fan

Conclusione

Now you can mount your hotend and then mount the whole assembly to the X-carriage plate.

Autore

AJ Pereira

Membro da: 29/05/20

2652 Reputazione

0 commenti