How to Fix A Stripped Screw Hole

Scritto Da: Isaiah Valdez Mireles
  • Commenti: 0
How to Fix A Stripped Screw Hole

Difficoltà

Easy

Passi

6

Tempo Necessario

30 - 35 minuti

Introduzione

A stripped screw hole occurs when the fibers around the hole deteriorate. It can be caused by too much weight on the screw, changes in the weather, and overscrewing. This guide will instruct readers on how to repair a stripped screw hole. The instructions are beginner friendly, and the estimated time to complete is 30-35 minutes.

  1. OAcmhL6Rxc2CXIUS

    • Using the toothpick as a reference, measure the depth of the screw-hole and the number of toothpicks needed to fill the screw hole.

  2. Yn6nNLFxA1R3Uwl2
    Yn6nNLFxA1R3Uwl2
    4OQurQCpF1ycwQiZ

    • Next, using the wood glue, cover the area of the toothpick(s) that will fill in the screw hole.

  3. asOAEaJRGdoOCTZ1
    asOAEaJRGdoOCTZ1
    mtAuZdxHBYBsqpGv

    • Place the toothpicks into the screw hole.

  4. B2JZrQFoILlquwyh

    • Now, break off the exposed segment of the toothpick(s).

  5. Bm1wmBOxjmgfejGv

    • Clean off the excess and let the wood glue dry for up to 30 minutes.

    • Recommended wood glue drying time may vary by product.

  6. FyWqhxBgXgmdWRLl
    FyWqhxBgXgmdWRLl
    FJRH3GdIJRtimYDy

    • Finally, using the screwdriver, screw the screw into the repaired screw hole.

Conclusione

Your screw should now hold secure.

Autore

Isaiah Valdez Mireles

Membro da: 23/08/22

133 Reputazione

0 commenti