How to Fix a Flexi Leash

Scritto Da: Joanette M. Anton Cordero
  • Commenti: 2
How to Fix a Flexi Leash

Difficoltà

Moderate

Passi

6

Tempo Necessario

15 - 20 minuti

Introduzione

So, you’ve made the decision of welcoming a new member of the family. Owning a puppy is one of the greatest privilages in the world. However, raising a pup may not be the easiest job. Being in a position where almost anything is at risk of breaking, trying to fix something might seem like a good idea for that bank account. Within this guide, we will teach you how to exchange a spring that could potentially be the cause of that retractable leash to stop working. Here you see How to fix a flexi leash easily.

  1. dI3vnCQNCnwcXgIu

    • Place the object in a clear bright space.

  2. Wco5YwraI4jZaYDM
    Wco5YwraI4jZaYDM
    PUJZHvJw1mkWeBml
    FC3EV4Q5iEDnHRKt

    • Start by removing all the 0.5 cm screws off the leash with the Phillips #0 screwdriver.

  3. exNjYGWSHWqtyLIV
    exNjYGWSHWqtyLIV
    Lj126YMhNwqqvQnd
    J1aLTscuwmuCrhuD

    • Using a plastic opening tool, begin to separate the top and bottom of the leash.

    • Make sure to press lightly to prevent unwanted marks.

    • It is most likely that the brake button will fall out. Place small items to the side to prevent it from being lost or undetected.

  4. pigMxbkZUAkhhMrR
    pigMxbkZUAkhhMrR
    IwAnCgTrCsdHNkwD

    • Carefully remove the brake mechanism. Inside should be a small spring.

    • Remove and replace the spring with a new one.

    • When placing the break mechanism back into its place, make sure the spring is positioned right in the middle.

    How did you find a new spring replacement that fits my leash?

    Jeffrey Knapp -

  5. cOLI6TcD6yfhyNSl
    cOLI6TcD6yfhyNSl
    mdYS23QXLMO6LPSw
    5kHWMVccN2K2eyOd

    • When the spring is successfully placed, initiate the retraction to it's original position.

    • Make sure the top and the bottom are aligned properly.

    • Slowly press the top and the bottom of the leash until it returns to its initial position.

  6. rZl1qQo4FnJegAHO
    rZl1qQo4FnJegAHO
    WxnbRQToFU2oSRaN
    Xh3SvxmlQ5peqNEY

    • Finish by screwing the 0.5 cm screws in their original position.

Autore

Joanette M. Anton Cordero

Membro da: 06/10/21

133 Reputazione

Un commento

Where do i buy the spring?

Andrew Storeck -