How to Remove the Front Panel in Your Whirlpool WRS315SDHW Refrigerator

Scritto Da: nicO
  • Commenti: 0
How to Remove the Front Panel in Your Whirlpool WRS315SDHW Refrigerator

Difficoltà

Easy

Passi

4

Tempo Necessario

2 - 5 minuti

Introduzione

Use this guide to replace the front panel in your Whirlpool WRS315SDHW Refrigerator.

The front panel covers the front bottom edge of the refrigerator. You need to remove this panel in order to access some components, such as the drain pan and condenser coils.

  1. GAB31IUS1UwNdE6E

    • Before you begin your repair, perform the following:

    • Turn off your main water supply

    • Unplug your device

  2. uZnovp3POltPPcNl
    uZnovp3POltPPcNl
    EEmEHtDyinkLLTC6
    NpS45AODrJVIyexU

    • Depending on your repair, open one or both doors.

  3. wW1LVBI3TRSUOnOh
    wW1LVBI3TRSUOnOh
    QOkYrIUrXQH5jfjq
    liaaPTJeyjVcmEOK

    • Use a Phillips driver to remove the two 15.2 mm-long screws securing the front panel.

  4. pkgPNWrR6cBBcleQ
    pkgPNWrR6cBBcleQ
    Z1cSFvhnp4ZSABoY
    khFOKgYpNOJOIZxg

    • Pull the front panel straight off the chassis and remove it.

    • You may have to slightly open the water filter door to remove the front panel completely.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Autore

nicO

Membro da: 14/04/15

15885 Reputazione

0 commenti