Introduzione
Use this guide to show you the steps to take to remove the front panel of your Whirlpool Duet Dryer.
Removing the front panel gives you access to the filter housing, the blower, the door switch, the drum light, and others.
This guide will work for most Whirlpool dryers. This guide is written with a model WED87HED dryer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
-
-
Use a small flat blade screwdriver or a spudger to unlatch both sides of the door switch connector.
-
Unplug the connector.
-
-
-
Remove the upper front panel sheet metal screws.
-
Tilt the machine backwards and prop it securely, or have a friend hold it.
-
Remove the sheet metal screws on the bottom edge of the panel.
-
-
-
Pull the bottom of the panel away from the chassis about two to three inches.
-
Lift the front panel off the small tabs on the chassis near the top of the panel and remove it.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
