How to Repair Cracks in a Cement Wall

Scritto Da: Mariah Gonzales
  • Commenti: 1
How to Repair Cracks in a Cement Wall

Difficoltà

Moderate

Passi

7

Tempo Necessario

3 giorni

Introduzione

Use this guide to repair cracks or chipping on your cement plastered walls.

Cracks can occur for several reasons; however, the two most common are weather erosion and aging materials. Upkeep can be time consuming, but with proper maintenance this will not have to be done often. Small cracks in your wall can quickly become larger with moisture and freezing temperatures. Adding a stucco finish to your cement wall is not necessary but is often desired for its aesthetic appeal.

This guide features the operating of power tools and basic knowledge of using cement related products. Please be aware that if not used correctly or cautiously, cement products can be dangerous. Information on cement burns can be found here.

This repair can be done in short bursts depending on the size the area you want to fix. On average, a few cracks can be fixed over the course of three days, taking roughly an hour each day. Drying time varies depending on product but averages 48 hours.

Before beginning, make sure to read through the guide to understand what will be required of you for this repair.

  1. WebqNrjbJ11YxpnP
    WebqNrjbJ11YxpnP
    BDdPbiww4su4QD1p
    BLKjmWCoxuC3AKTM

    • Remove the loose pieces of the wall in and around the crack.

    • Widen the crack to about an inch thick with an automatic angled concrete grinder.

    • A manual grinder may also work but will require more physical effort compared to the automatic grinder.

    • Use caution when operating power tools.

    Amazing work

    luv verma -

  2. tE5dFQ5TIQZEBj6j
    tE5dFQ5TIQZEBj6j
    IvCoNK3pNiQUggJS
    Nktcqcf1kERsMSlw

    • Follow the instructions on the cement patcher mix until the product is a paste consistency.

    • Soak a sponge in water and wet the now larger crack. Be sure to get water into the entire crack so that the area is moist.

    • Use a trowel to fill the mix into the crevices.

    • You may also use a steel putty knife or margin trowel.

    • Caution: Wear gloves to avoid getting paste onto your hands. Contact with skin could cause second or third-degree chemical burns.

  3. kG4a6JwGRwto5aET
    kG4a6JwGRwto5aET
    qMRmJNcN6rPZJ2tT
    LmO6c2mlhnYfm4AJ

    • Rewet the sponge and begin to smooth the patch mix into the wall.

    • A smooth blend will ensure the product stocks evenly across your wall and allows it to blend in.

  4. Hh5BHQR154Lo5sjs
    Hh5BHQR154Lo5sjs
    lUmV1ng6tYJv3ZNq

    • Allow the patcher mix to dry.

    • Drying times vary depending on the product and may take up to 48 hours.

    • Place tape in straight lines parallel to the edges of your dry plastered area.

  5. fGq64BngDOLG4CH1
    fGq64BngDOLG4CH1
    CouR1uqwCl1bHERH

    • Wet the sponge and begin slightly tapping the newly plastered area.

    • Moisten the area until the entire boxed in area is damp.

  6. wbeQaMf3IByakMSn
    wbeQaMf3IByakMSn
    xIogcyNuAq2tIpu1
    eEURNv3WBeRq2wAW

    • Add stucco finish with the tile trowel.

    • Once the cemented area is covered with the stucco finish, take the foam plastering trowel and spread stucco finish to the edges of the tape.

    • If the trowel is too dry to spread the finish, moisten it with the water from earlier.

    • Blend the finish into the surrounding tape.

  7. lqrVCKecFgtGo3hD

    • Remove the tape and blend areas that may not match.

    • Allow time for the finish to dry and the wall will be restored to crack-free.

Conclusione

Enjoy your repaired concrete fence wall. These steps can also be used on any other concrete surfaces that have cracks.

Autore

Mariah Gonzales

Membro da: 13/01/22

164 Reputazione

0 commenti