How to Repair a Dangle Earring

Scritto Da: Sabrina L. Martínez Ortiz
  • Commenti: 0
How to Repair a Dangle Earring

Difficoltà

Very easy

Passi

6

Tempo Necessario

10 - 20 minuti

Introduzione

This guide will show you how to fix a broken jump ring on a dangle earring. There is no need for special skills to repair a broken jump ring on your earring, you just need to have the tools to fix it.

You can apply these 6 steps to any type of earring that has a broken or missing jump ring and replace it with a new one. It is easy to replace and inexpensive to buy, you can get it in any jewelry or craft supply store.

  1. afXgXv6YrtkB2uW6

    • Clean the jump ring of the earring and the earring itself.

    • This step is optional.

  2. P6vNflMDv6jpmLmJ
    P6vNflMDv6jpmLmJ
    A25WqM44MOOQa5PF

    • Take the jump ring with the two small needle-nose pliers.

    • Gently open the jump ring using the needle nose pliers.

  3. AKqN5TqrMC3GLSAo
    AKqN5TqrMC3GLSAo
    IbATjM43Vtifs13F

    • Take the top part of the earring with your dominant hand.

    • Put the jump ring through the top part of the earring.

    • You can hold the jump ring with a small needle-nose pliers with your non-dominant hand.

  4. 4ZI2b4eACVqufncy
    4ZI2b4eACVqufncy
    t4xGAuISqVKcGibD

    • Pass the earring through the opening of the jump ring.

    • Make sure that both parts of the earring face the same direction.

  5. S55ZyJLAqHfJUMSa
    S55ZyJLAqHfJUMSa
    GMjoXYE44hXFtZls

    • To close the jump ring, use both of the needle nose pliers.

    • Use your dominant hand to close the space in the jump ring.

    • Try to keep your non-dominant hand still.

  6. BOTQZjBX3upPPFUe
    BOTQZjBX3upPPFUe
    fxNBDXbDPZi3ZAYn

    • Make sure that the jump ring is closed.

    • Hold the earring up to make sure it's secure.

Conclusione

To just change a clasp that it was not broken, follow these instructions in reverse order.

Autore

Sabrina L. Martínez Ortiz

Membro da: 18/03/22

133 Reputazione

0 commenti