How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro

Scritto Da: Adam Ben-David
  • Commenti: 0
How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro

Difficoltà

Moderate

Passi

3

Tempo Necessario

6 minuti

Introduzione

The fader arm is made of an easily bendable metal. Because of this, small bumps or a push in the wrong direction can accidentally bend the arm. This guide will show you how to bend the arm back to its proper alignment.

  1. uCt12ouXiHd54VWn

    • Remove the fader cap from the bent fader arm

  2. ZQ2vxQumKuUO4rkw
    ZQ2vxQumKuUO4rkw
    Z23LbDCCfBRN6QOK

    • Use needle nose pliers to hold the fader arm in position.

    • Gently straighten the fader arm.

  3. 5JrABbUpk3GjCAJB

    • Place the fader cap back on the fader arm.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Adam Ben-David

Membro da: 13/09/23

156 Reputazione

0 commenti