How to Tighten Loose Bike Spokes

Scritto Da: Pavle Janev
  • Commenti: 1
How to Tighten Loose Bike Spokes

Difficoltà

Easy

Passi

6

Tempo Necessario

15 - 30 minuti

Introduzione

When overused or not taken care of, many bikes will have loose and wobbly spokes to the point where it is dangerous to use the bike. I will show you how to tighten loose spokes.

  1. RafRiUoWlhy5YsGO
    RafRiUoWlhy5YsGO
    RoVEEbv5OfBkRHgX
    tMtBhVN52jCNW3iE

    • Place the bike in a position where you can comfortably access the wheel.

  2. YYrrPcHEuJFdKD5b

    • Inspect the wheel and look for loose spokes.

  3. pOKqJTluxCgqF5T3
    pOKqJTluxCgqF5T3
    2HxcgeZFFrpPJYGO
    AkEKtTetNPHZBSY3

    • Use a spoke wrench to tighten the spoke. Retighten the spoke clockwise a quarter turn at a time.

  4. gQdMvyArP1eEEDjV
    gQdMvyArP1eEEDjV
    tpBw5gIRMmYUXScH

    • Since you just adjusted the tension of a spoke, we need to make sure the tension in all the spokes is equal throughout.

    • Use the spoke wrench to adjust the rest of the spokes as needed so that they all have equal tension. Turn the spoke wrench clockwise a quarter at a time.

  5. idCcdgLC3DukDJIV

    • Once the spokes are tightened, relieve the tension in the spokes by squeezing them.

    • This is to check that your spokes are now secure and won’t get loose.

    • Be sure to give the loose spokes an extra test to make sure they are now sturdy.

  6. DGItrkFSQ5oDRrug

    • Spin the wheel to make sure the spokes are secure and to make sure that the wheel does not need additional truing.

Autore

Pavle Janev

Membro da: 12/01/22

160 Reputazione

Un commento

You should notice the tension spoke when tightening your bike spoke because it will affect the wheel’s stability. Tighten clockwise and turning the wrench in small increments of about a quarter turn will allow you to avoid tightening too much.

Dalton -