IBM ThinkPad T42 Keyboard and Trackpad Replacement

Scritto Da: Austin Kidd

Difficoltà

Moderate

Passi

Tempo Necessario

10 - 15 minuti

Introduzione

Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

leave these four screws alone. No need to remove them.

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

Flip the laptop over and open the screen to access the keyboard and trackpad.
The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
The bezel and keyboard will be loose, be careful.

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Membro da: 21/04/10

299 Reputazione