Introduzione
An Insignia NS-CLOPP2 Speaker is used to wake one up with a clear alarm for waking up on time as well as a built-in radio tuner for listening entertainment. Here are the tools, skills, and requirements needed to replace a broken Insignia NS-CLOPP2 Speaker that is no longer creating any type of noise or the speaker is creating gray noise.
Strumenti
-
-
First, unscrew the back panel with a 1/3 Phillips screwdriver, and make sure the motherboard has been pulled out, not cutting any of the wires attached, exposing the blue speaker.
-
-
-
Locate the speaker, the dark blue colored circular device, pictured in the center of the photo.
-
-
-
Using a plastic opening tool, scrape off the glue attaching the speaker to the black plastic of the clock.
-
-
-
Lastly, once the adhesive has been removed, gently lift the speaker out of place.
-
To put a replacement speaker in, use technology-friendly adhesive to glue it back in place.
-
To reassemble your device, follow these instructions in reverse order.
-
