Kenwood KDC-BT362U Metal Case Separation

Scritto Da: Pablo Cabrera
  • Commenti: 0
Kenwood KDC-BT362U Metal Case Separation

Difficoltà

Easy

Passi

7

Tempo Necessario

10 - 15 minuti

Introduzione

  1. AyWsMLwoiTWuqFfD

    • Locate the face-plate eject button.

  2. FyrHDQbARNQx2ZXL
    FyrHDQbARNQx2ZXL
    tDPW4nqxTDEIbTuX

    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. j3lJAGYwAHCOvDNr
    j3lJAGYwAHCOvDNr
    nsME2qxXF1V3PKHx

    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. leEN1Z3aovxNTRGk
    leEN1Z3aovxNTRGk
    3DaVdVXCgW5rQyQt

    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. UMbncD1ixfr2qeWi

    • Remove the front panel.

  6. KIXPeGULHofACwiZ
    KIXPeGULHofACwiZ
    UuIKfGDjUacuLgKs
    ARMNST22WJXTb1FP

    • Use the Phillips #0 Screwdriver to remove the screws off of the metal case.

  7. FCWJg4SOMMcBsaEc
    FCWJg4SOMMcBsaEc
    Wg2jQWtGnmKDfLGe
    OQRSeWnrkfsWBhUR

    • Carefully separate the top and bottom halves of the metal case apart.

    • Do not separate the metal case halves completely.

    • Carefully pull the DVD-Drive ribbon cable from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Pablo Cabrera

Membro da: 04/10/16

201 Reputazione

0 commenti