Keurig B70 Platinum Water Filter Replacement

Scritto Da: Emily Ramirez
  • Commenti: 11
Keurig B70 Platinum Water Filter Replacement

Difficoltà

Very easy

Passi

3

Tempo Necessario

5 minuti

Introduzione

Clogged filter?

This guide will show you how to remove the water filter found inside the Keurig B70 Platinum water reservoir.

You will only need a Phillips #2 screwdriver for this guide.

  1. Qjh55HGWQ3pALIWG
    Qjh55HGWQ3pALIWG
    RZXvKQKFvtNsgRZs
    TMZB3nCbcioJfLWc

    • Remove the water reservoir from the Keurig by lifting it upwards and pulling it outwards.

    • Be sure to empty the reservoir before continuing to the next step.

    What is the part number for the K70 reservoir filter?

    Raymond Stivenson -

  2. dnJVLp5SjLtMeQog
    dnJVLp5SjLtMeQog
    ZGkOvTwlRMpd1Qxp
    ks3eWeFg6lLihb6a

    • Remove the three 11.0 mm screws from the reservoir filter.

    • You may need to use tweezers to pull out the screws.

  3. rEXlZQSDsKrWAfx1
    rEXlZQSDsKrWAfx1
    TSNhKLWHCI6vS46l
    1G1IfEaNVCMP2Q3W

    • Firmly twist the filter counterclockwise to remove it.

    • When adding the replacement filter, make sure the filter lines up with the screw holes.

    no way to get may hand in there to twist off !!!!

    dhklein18 -

    no way to get my hand in there to twist off !!!!

    dhklein18 -

    Where can I get the filter to replace it?

    wolfman23 -

    Where can I get the filters for the Keurig B70?

    wolfman23 -

    Where to get the filter??

    Allen Pritchett -

    Do I remove this built in filter if I want to use a Kuerig tall handle charcoal filter?

    Dacaria L -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Emily Ramirez

Membro da: 14/10/18

97 Reputazione

4 commenti

What are the two items inside the water resin?

There is the round item, and next to it an oblong item. I am really confused

Joan -

The round item with 3 screws is the built in filter. The oblong item is the water level gauge.

Dacaria L -

I just ordered a filter starter kit. Do I just insert the kit on top of the round item?

Joan -

I bought a Kuerig tall handle starter kit with charcoal filters. Tried install it over the existing built in filter, it didn’t fit. I think the round filter has to be removed in order to use the starter kit.

Dacaria L -