Kindle Fire HD 6 Battery Replacement

Scritto Da: Cassandra Beck
  • Commenti: 5
Kindle Fire HD 6 Battery Replacement

Difficoltà

Easy

Passi

4

Tempo Necessario

5 minuti

Introduzione

This guide will show how to remove the battery from the Kindle Fire HD 6. You'll often need to remove the battery just to access and remove the motherboard. You might also need to remove the battery if it's damaged and needs to be replaced.

  1. GrKHUCGbSffVcSeV

    • Place the device face down on a clean cloth or another smooth surface.

    • In the following steps, you will need to apply some force to your device. If your device is on a rough surface, you may scratch the screen.

    • Insert the plastic opening tool between the device’s front and back panels. You might need to wiggle the tool up and down to wedge it in the gap.

    • Maneuver the tool around the device until the back unclips from the front panel.

    I wasn't sure that I would be able to fix my kindle. I did purchase another kindle, which was alright. I wanted a second kindle so with the purchase and my old one know fixed I am really glad. I feel if I have any future problems I will be able to fix it myself.

    RUBY PEOPLES -

    i had a battery that wouldn't even last a full day in the end. by accident i let the battery fall below 10% charge and when turned on it only showed the battery icon. I fully charged it and now i am having no problems with it. what i think happened is it reset the batteries memory and that was the problem. worth trying anyway before buying a new battery.

    soupamanx -

  2. PItGFeC3cG1LEHBF
    PItGFeC3cG1LEHBF
    mZEoeTjXYQATeQQt

    • Carefully separate the back panel from the rest of the device internals.

  3. SQGBpUw5JBWcEVdc

    • Gently pry the battery free from the adhesive holding it in place.

    • Take care not to pierce or rupture the battery, which can release dangerous chemicals.

    • If you're having trouble working the battery free, warm it up with an iOpener or hair dryer to soften the adhesive, and then slide a credit card behind the battery to break up the adhesive.

    • Be careful not to yank the battery out—you'll need to disconnect a connector before removing the battery completely.

  4. UD1ghyIVPV5cZIfN
    UD1ghyIVPV5cZIfN
    hjfdWxhlPRVGmgSG

    • Remove the multi-colored connector that joins the battery and the motherboard by pulling it straight up.

    • Remove the battery.

    What if the connector on the motherboard to the battery got damaged in the process of removing the battery?

    minecraftmargaret -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Cassandra Beck

Membro da: 13/01/15

885 Reputazione

2 commenti

Thank you it worked for me.

A bit nervous breaking it down, once I got the back plate off it was very simple, unplugged the battery, reconnected put it back together fired it up , great advice.

Thanks again

Regards

Terry

terry pils -

The battery removal step did not sufficiently warn about how hard the adhesive used for the battery was, and using the spudger ended up piercing the battery when I tried to pry the battery off.

Sean Collins -