Kodak EasyShare M381 Button Replacement

Scritto Da: Christina Hamby
  • Commenti: 0
Kodak EasyShare M381 Button Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

2 minuti

Introduzione

Removal and replacement of the buttons from your Kodak EasyShare M381 can be simple and easy. You can also use this guide for simply cleaning your camera buttons if they have a weak connection. Be sure to turn the camera off and remove the batteries before beginning this repair.

  1. XMYhBBXAUAFPfRXI
    XMYhBBXAUAFPfRXI
    vUHRXXMfh1ZdeiJy

    • First, press in and slide forward the battery latch as indicated by the arrow.

  2. GSXHSGNJMHvvh3tx

    • Press down on battery until you hear a click and release it. Battery should easily slide out.

  3. S6gwAlMW36YQg1td
    S6gwAlMW36YQg1td
    gkIJvL3uZGlgHAAI
    uWJNtw5wJl5gASyh

    • Remove the 3.9 mm frame screws using a Phillips #00 screwdriver.

    • Using a magnetized surface to keep from losing screws may be very helpful.

  4. Ts2M3OBLBDXEPKtL
    Ts2M3OBLBDXEPKtL
    5yvOx4L4H1SYMRwj

    • Using both hands, carefully pull the frame apart from the camera.

  5. VGhrn5ADcCTMfGlj

    • Carefully pick up frame and push upward on buttons.

  6. Qk1A1jQtwCFP1e2F

    • Clean and replace as needed.

    • A microfiber cloth, or any other type of electronic cloth may be used to clean them if desire.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Christina Hamby

Membro da: 30/01/15

449 Reputazione

0 commenti