Krups 963 Bottom Panel Removal

Scritto Da: Wyatt Hall
  • Commenti: 0
Krups 963 Bottom Panel Removal

Difficoltà

Moderate

Passi

3

Tempo Necessario

Nessuna stima

Introduzione

Prerequisite Only

  1. TRwPn3lNRfqKraOu

    • Make sure the device is unplugged before continuing.

    • Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

  2. vTFNuiKQV5ITIXRw

    • Remove the single black Phillips size 0 10mm length screw on the back of the machine.

  3. U5XGlBd1IQmyLPTT

    • Remove the bottom cover from the machine and slide it down the power cord.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Wyatt Hall

Membro da: 13/10/14

842 Reputazione

0 commenti