Introduzione
Use this guide to replace the detergent bellows or detergent hose in your LG WM3050CW Washing Machine.
The detergent bellows connects the detergent dispenser assembly to the tub.
-
-
Turn off the main water supply
-
Unplug your washer
-
Disconnect all water connections at the rear of your washer
-
-
-
Use a Phillips driver to remove the two bottom 16.5 mm-long screws securing the top panel brackets.
-
-
-
Tilt the top panel upward to completely disconnect it from the chassis.
-
Remove the top panel.
-
-
-
Insert a flathead screwdriver between the chassis and the plastic clip securing the control panel cable.
-
Compress the clip and slide it out of the chassis to remove it.
-
Move the cables out of the way of the detergent dispenser hoses before you continue.
-
-
-
Use slip joint pliers to pinch the detergent dispenser hose clamp and pull it away from the assembly.
-
-
-
Use slip joint pliers to gently rotate the detergent dispenser hose back and forth around its connection and loosen it.
-
-
-
Pull the detergent dispenser hose straight off its connection on the assembly.
-
Repeat the loosening and removal procedure for each hose.
-
-
-
Use a Phillips driver to loosen the screw securing the bellows to the detergent dispenser.
-
Pull the bellows straight off its connection on the dispenser to disconnect it.
-
-
-
Use a Phillips driver to loosen the screw securing the bellows to the drum.
-
Pull the bellows straight up from the drum to disconnect it.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
