Lenovo IdeaPad 110-17IKB Fan Replacement

Scritto Da: Cameron Mounce
  • Commenti: 0
Lenovo IdeaPad 110-17IKB Fan Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

30 - 45 minuti

Introduzione

Verify whether the laptop makes a whirring sound when it is turned on in case it starts to overheat. If the laptop is silent, it can experience a thermal cool down, which is indicative of a malfunctioning cooling fan. You can replace the cooling fan by following the instructions in this article.

  1. WlHBpFAgfWIc5dni

    • First, before you do anything, make sure the computer has been turned off and unplugged.

    • Place the the computer bottom facing up. Unscrew the eleven 6 mm screws using a Phillips #0 screwdriver.

  2. YWmqqKKaXUP3MeUC
    YWmqqKKaXUP3MeUC
    MI6C3fDVZwIBXEbR

    • Use an opening tool to gently disconnect the clips on the side of the back panel.

    • DO NOT try to force open the panel, as this may cause damage to it.

  3. XjU6CEHhEsSPT1pV
    XjU6CEHhEsSPT1pV
    yuLDwmHTuGRwZslp

    • Pry out the optical drive opposite of the laptop.

    • Since the screws have already been removed, you will not need to worry about any more screws on the optical drive.

  4. 1a34odJ1GoTCp1f1
    1a34odJ1GoTCp1f1
    iLDOgwrrJm1Z6Srt
    CXYXIFGcMK2JvyKV

    • Release the remaining clasp and remove the lower case.

  5. LOqZn6eAbj1SnDIe
    LOqZn6eAbj1SnDIe
    5DDQrSICBsVJeCRZ

    • Unscrew the four 6 mm Phillips #0 screws that secure the fan.

    • Push the white fan connector directly out of its port tweezers or a pry tool.

    • Lift the fan up and out of the chassis.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Cameron Mounce

Membro da: 06/09/23

668 Reputazione

0 commenti