Introduzione

Prior to upgrading or replacing a laptop's HDD, it is essential to verify that the HDD is compatible with the model of the laptop, make sure that all key data is properly backed up, and take budget and performance requirements into account.

  1. WlHBpFAgfWIc5dni
    • First, before you do anything, make sure the computer has been turned off and unplugged.

    • Place the the computer bottom facing up. Unscrew the eleven 6 mm screws using a Phillips #0 screwdriver.

  2. YWmqqKKaXUP3MeUC
    YWmqqKKaXUP3MeUC
    MI6C3fDVZwIBXEbR
    • Use an opening tool to gently disconnect the clips on the side of the back panel.

    • DO NOT try to force open the panel, as this may cause damage to it.

  3. XjU6CEHhEsSPT1pV
    XjU6CEHhEsSPT1pV
    yuLDwmHTuGRwZslp
    • Pry out the optical drive opposite of the laptop.

    • Since the screws have already been removed, you will not need to worry about any more screws on the optical drive.

  4. 1a34odJ1GoTCp1f1
    1a34odJ1GoTCp1f1
    iLDOgwrrJm1Z6Srt
    CXYXIFGcMK2JvyKV
    • Release the remaining clasp and remove the lower case.

  5. XcSQrXUENUGcvHwy
    • Use a Phillips #1 screwdriver to unscrew the four 5 mm screws that are holding the hard drive in place.

  6. MwcuwMk6kRx1OETN
    MwcuwMk6kRx1OETN
    NMtjlQMBccUICCFJ
    • Do not lift the hard drive straight up; this might break the connection port.

    • Softly slide the hard drive away from the port.

  7. mUIgG4LXM5l25Tlg
    mUIgG4LXM5l25Tlg
    cpcV5TKEPn22Y3QF
    • Use a Phillips #1 screwdriver remove the 2 screws from both sides of the hard drive (total of 4 screws).

  8. 22ZPjSatAytmnGcj
    • Remove the hard drive from the housing mount.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cameron Mounce

Membro da: 06/09/23

668 Reputazione

0 commenti