Introduzione

The Lenovo IdeaPad 110-17IKB laptop's back case can be removed using the instructions in this article. Using this guide, you can remove the device's back case to gain access to the hard drive, motherboard, or other computer parts if you need to replace them. A screw and plastic retainer clips hold the back case in place. If you handle these clips too roughly, they may break off and snap. Every step requires that the battery be disconnected, which can only be done by removing the backplate. When removing the gadget, take care not to puncture any internal components or batteries, since this could lead to problems. Use caution and the iFixit nylon or plastic opening tools to lessen these movements.

As always, before you start, turn off the device and unplug from any power sources that may be attached.

  1. WlHBpFAgfWIc5dni
    • First, before you do anything, make sure the computer has been turned off and unplugged.

    • Place the the computer bottom facing up. Unscrew the eleven 6 mm screws using a Phillips #0 screwdriver.

  2. YWmqqKKaXUP3MeUC
    YWmqqKKaXUP3MeUC
    MI6C3fDVZwIBXEbR
    • Use an opening tool to gently disconnect the clips on the side of the back panel.

    • DO NOT try to force open the panel, as this may cause damage to it.

  3. XjU6CEHhEsSPT1pV
    XjU6CEHhEsSPT1pV
    yuLDwmHTuGRwZslp
    • Pry out the optical drive opposite of the laptop.

    • Since the screws have already been removed, you will not need to worry about any more screws on the optical drive.

  4. 1a34odJ1GoTCp1f1
    1a34odJ1GoTCp1f1
    iLDOgwrrJm1Z6Srt
    CXYXIFGcMK2JvyKV
    • Release the remaining clasp and remove the lower case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cameron Mounce

Membro da: 06/09/23

668 Reputazione

0 commenti