Introduzione

A faulty fan in the Lenovo IdeaPad Flex 5-1570 is a problem on its own but can also cause more serious problems for the device. Whether your fan is making noise, permanently damaged, or just simply won’t work, this guide will show you how to easily remove and replace it.

  1. HhST2UwueZdLRbYq
    HhST2UwueZdLRbYq
    Jng56j2Nhli3eDNk
    • Remove the ten 5 mm Phillips #00 screws that are holding the back panel on.

  2. pUKNhLnsy6ukbCxN
    pUKNhLnsy6ukbCxN
    EIjIMHaqfU1IXfKy
    3baUFJJtcAHASbaa
    • Use a spudger to pry open the back case at the two hinge cutouts.

    • Gently use the plastic opening tool around the edges of the laptop to pry up the clips holding the rest of the back panel.

  3. Cah2v4ZPGgsx2PNd
    Cah2v4ZPGgsx2PNd
    FSDLw5tjMCFlBS31
    • Once all the clips have been disengaged, lift off the back cover.

    You should probably disconnect the battery immediately after opening the laptop. Don’t want to risk damaging your nice hardware.

    Zack Colman -

  4. 2euY3wXDHWRvVbDM
    • Remove the two 5 mm Phillips #00 screws that secure the fan in place.

  5. jhNLDPxFZ4TFpuaF
    • Using your hands, remove the wire that is wrapped around the base of the fan.

  6. tTJp1iSftbI6r1qj
    tTJp1iSftbI6r1qj
    aDuNPFuC6YKpIT4V
    • Disconnect the wire holding the fan and the motherboard together.

    • Remove the fan from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Will Schafer

Membro da: 23/01/20

380 Reputazione

Un commento

thank you for you share

Liu bing -