Lenovo Yoga C930-13IKB Display Replacement

Scritto Da: Josiah Grayson Sawyer
  • Commenti: 2
Lenovo Yoga C930-13IKB Display Replacement

Difficoltà

Moderate

Passi

8

Tempo Necessario

30 - 45 minuti

Introduzione

  1. oNJtsja5YlMSp6NA
    oNJtsja5YlMSp6NA
    cDbchhXjYIWS43SS

    • Using a halberd spudger, gently lift up the metal bezel that lines the lower edge of the display.

  2. QDQsW5vBlFyyA2fE

    • Remove the ten 3 mm screws along the bottom edge of the display with a Phillips #00 screwdriver.

  3. SiyhBRyZ1wNKI5rX
    SiyhBRyZ1wNKI5rX
    qqWRedPwGXODtUhc

    • Gently wedge two opening picks underneath the display.

    • Slowly work the opening picks around the display.

    • Add opening picks as needed to keep display separated from the frame.

    • Use caution if dealing with broken glass.

    • The iFixit suction cup tool can be used to add some extra leverage to the mix when removing the display.

    Hi everyone, please be VERY careful on this step. I used the opening picks as depicted, and I ended up cracking my screen and will have to buy another one. The glass is very fragile. I also believe that this guide is potentially missing a step. Just as the battery has double-sided adhesive tape holding it in place, the touchscreen display also has that tape behind it as well. If you look closely at where both the opening picks are in the first picture on the guide, you will see little white tabs that help pull out the tape before taking the screen off. I don't know if this contributed to me breaking my screen, but I thought I would leave a warning so no one else forgets to remove the tape beforehand just in case. Look up "Lenovo Yoga C930 LCD Removal Tips" uploaded by PC 911 Computer & Cell Phone Repair on Youtube to get a better look at the adhesive tabs. Happy fixing everyone.

    Daniel Way -

  4. 4IumNUcZQwWiurV3
    4IumNUcZQwWiurV3
    JLcIAEsVsBULZw3T

    • Gently flip the display assembly to rest on top of the keyboard.

  5. EVYw2AvRj5Qv4T24
    EVYw2AvRj5Qv4T24
    xFwEZaKwieIwbHvt

    • Use the halberd spudger to lift the locking tab of the ZIF connector holding the black ribbon cable that runs vertically across the display.

    • Pull out the black ribbon cable from the connector.

  6. IcXDX6uLpJZ6YwYo
    IcXDX6uLpJZ6YwYo
    paAhbpVvVTI1nP1b
    DOTFZwAh3laqP4wm

    • Use the halberd spudger to lift the latch on the ZIF connector of the horizontal black ribbon cable.

    • Pull out the horizontal black ribbon cable from the connector.

    • Gently pull the rest of the horizontal black ribbon cable from the back of the display.

  7. RJjiBTkHWbJ44gRW
    RJjiBTkHWbJ44gRW
    ALEoUuGKHARFINCR
    axmi1NMXBvhMxL3G

    • Use the halberd spudger to flip the metal latch of the display cable up.

    • Using the halberd spudger, gently pull the connector out of the display.

  8. SU2pvATdqLhoY3nl

    • Gently lift the display away from the laptop frame.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Josiah Grayson Sawyer

Membro da: 17/09/20

514 Reputazione

Un commento

The screen is glued with iphone battery tape so you have to pull the white tabs at the bottom of the screen to release the tape as like almost all the last generation screens.

Roberto Meniketti -