Introduzione

Is your Levoit LV-H132 not turning on because the cable is damaged? Does the cord create sparks when plugged in or does it smell burnt? If the power cord doesn’t allow power transmission, then the air purifier will certainly not power up. To fix that, we have to replace it. So, use this guide to fix your damaged cord.

  1. Gg6Lnsjrct1PuG2D
    Gg6Lnsjrct1PuG2D
    GrUKZyXJn4TZZHO2
    • Pry off the plastic top using a metal spudger.

  2. KPcypTTTRhZUA33U
    KPcypTTTRhZUA33U
    hBB6hpNWQSZIGZg2
    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

  3. QarixVFZcBkuqQYP
    QarixVFZcBkuqQYP
    faIcAWMNiipJWA1A
    • Disconnect the top half from the bottom.

  4. iOSTsRB1IDKUUIdB
    iOSTsRB1IDKUUIdB
    QWHS2N36oGSg4IOH
    VXRLEUeuYkNX6lOp
    • Disconnect the circuit board cable.

  5. bPAqfZCHE2iq1l1Y
    bPAqfZCHE2iq1l1Y
    IKURnEYmH2UfwcH1
    • Use a heat gun to heat up the heat-shrink tubing wraps.

    • Disconnect the damaged cable from the wires that are connected to the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

ashleigh bailey

Membro da: 12/09/23

127 Reputazione

0 commenti