Levoit LV-H132 LED Replacement

Scritto Da: Joshua Lopez
  • Commenti: 0
Levoit LV-H132 LED Replacement

Difficoltà

Difficult

Passi

6

Tempo Necessario

15 minuti

Introduzione

Are the LED lights on your Levoit LV-H132 not lighting up, flickering, or dimming? If so, use this guide to replace the LED lights. This repair is required to enable the user to determine the status of their device.

  1. uYDJi6otiEcFLf3P
    uYDJi6otiEcFLf3P
    TWtY6seXW6NCeXno

    • Pry off the plastic top using a metal spudger.

  2. GLVMgHSsJviLwLAN
    GLVMgHSsJviLwLAN
    biQiLDPV3Ey6G3ek

    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

  3. bIaUaFF6ZPgPIvRW
    bIaUaFF6ZPgPIvRW
    VaFoBXLa4alS1vyo

    • Disconnect the top half from the bottom.

  4. lswaUct5OCBgvDxu
    lswaUct5OCBgvDxu
    rQdemVl4srlC3nuI
    L6HidBtJmc1PZraa

    • Disconnect the circuit board cable.

  5. TvSkhEVGKIT6BSsj
    TvSkhEVGKIT6BSsj
    urQ4fSONnOBkhKlM

    • Remove the two 5 mm screws with a Phillips #1 screwdriver.

  6. nRBTyMO4LKThGoMD

    • Desolder the joints holding the faulty LED and switch to the PCB.

    • Slide the faulty LED out and replace it with the functional one.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Joshua Lopez

Membro da: 12/09/23

189 Reputazione

0 commenti