Introduzione
If your battery will no longer accept a charge and you need to replace the battery, you can do so with this guide. For this guide, you will need a T4 Torx screwdriver and a spudger. This is a popular repair and it is very easy to do!
Strumenti
-
-
Gently pull the right ear pad off, starting from the top.
-
Slide your finger around the edges until it releases completely.
-
Remove the ear pad.
-
-
-
Lift off the speaker housing with care not to strain the connected cable.
-
Gently wiggle the battery cable side to side while pulling it out to disconnect the battery.
-
-
-
Use a spudger to pry the battery away from its housing, gently using pressure from all sides.
-
To reassemble your device, please follow these instructions in reverse order.
3 commenti
This guide is great, but mentioning what kind of battery to purchase for the headset would make it infinitely better...
I fully agree
Its a 1.5 phillips on the right side. On the left side its a T5 screw not a T4. And you can easily remove the battery without a spudger. It came out with my bare hands.