Introduzione
Strumenti
-
-
Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.
-
Remove the fan assembly ribbon cable from its ZIF socket.
-
-
-
Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.
-
Disconnect the fan ribbon cable.
-
Conclusione
To reassemble your device, follow these instructions in reverse order.
I had better luck using a T5 driver.
somethingorother -
Same here. Mine were T5, not T4.
Carsten Clark -
t4 was good for me
Arden De Cuir -