MacBook Pro 13" Retina Display Late 2012 I/O Board Data Cable Replacement

Scritto Da: Walter Galan
  • Commenti: 0
MacBook Pro 13" Retina Display Late 2012 I/O Board Data Cable Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

Nessuna stima

Introduzione

Prereq for logic board.

Strumenti

  1. Qhauofpvg6McR5GQ
    Qhauofpvg6McR5GQ
    pSlBL1Mu5kLDXoSa

    • Use the flat end of a spudger to pry the right side of the I/O board data cable connector up off its socket on the I/O board.

    • When prying the I/O board data cable connector from its socket, make sure to pry the connector itself and not the socket. Prying the socket may cause irreversible damage to the I/O board.

  2. OvJFKtFYMRoCSRaB
    OvJFKtFYMRoCSRaB
    FS2OoLlUaNCRbDjO

    • Wedge the flat end of a spudger beneath the left side of the I/O board data cable connector.

    • Gently twist the spudger to disconnect the I/O board data cable connector from its socket on the logic board.

  3. pwNcLhGv3LkbAeUv

    • Lift and remove the I/O board data cable from the MacBook Pro.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Walter Galan

693768 Reputazione

0 commenti