Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement

Scritto Da: Jefferson Hsu
  • Commenti: 0
Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement

Difficoltà

Easy

Passi

5

Tempo Necessario

5 - 10 minuti

Introduzione

Use this as a guide to remove or replace the switch on the rear side of the FightPad.

  1. pm416YSWvG5ucNwk

    • Use tweezers to completely remove the sticker from the rear of controller.

  2. 3uXvLlgQHkmtRRUM

    • Find the seven 8.3 mm Phillips screws on the rear of the controller and remove them.

  3. FumE6DnlEejBvJim
    FumE6DnlEejBvJim
    EOnKxbsxMUVWcPcp

    • Use a plastic opening tool to separate the rear and front casing by inserting it in-between the two cases.

    • Use the plastic opening tool to pry the two cases apart.

  4. VVEjO1MLOoycT6Qt
    VVEjO1MLOoycT6Qt
    IJqQCC1YUNNyCDK3

    • Remove the two rubber side grips.

  5. 6mf2FoIsZRtoAyTA
    6mf2FoIsZRtoAyTA
    unvODXCdUGvmTYGU

    • Locate RS-DP-LS switch.

    • Pull upwards on the switch to remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Jefferson Hsu

Membro da: 19/09/12

411 Reputazione

0 commenti