Introduzione

A quick and simple guide to replacing the battery in your Marshall MID ANC headphones. Might apply to other models, too.

The replacement battery needs a NTC cable + temperature regulation PCB.

I found this one on Amazon Germany working flawlessly (charging and functioning well since 12/2023):
DC 3.7V 800mAh 603040 Wiederaufladbare Li-Ionen Batterie für Marshall MID Major II Major III Major IV Bluetooth Kopfhörer VDL603040 SR603040

  1. aUuDoUnvocgOy5T5
    aUuDoUnvocgOy5T5
    tZ1K2fZHC2HkBanQ
    • Twist off the ear cushion on the left side (the one with the button)

  2. 3TgQPTDcegjAnPUv
    • Unscrew the 4 screws

  3. NYMx23gEPmlEyZeP
    NYMx23gEPmlEyZeP
    1LEL5aKXiT4fStIP
    • Unscrew the 3 screws holding the PCB in place

  4. P6o2xKpKdPRIUSFk
    P6o2xKpKdPRIUSFk
    ZqyNjnFnSVsxcj1w
    • Unseat the old battery, which is most likely taped to the bottom by double-sided sticky foam

  5. uMcQwCYbD524Oswu
    uMcQwCYbD524Oswu
    BduWJJPAe5aMR1Pk
    • Unsolder the 3 battery leads.

    • Solder the 3 leads from the new battery (red=B+, black=B-, white=NTC).

Conclusione

To reassemble your device, follow these instructions in reverse order.

trckndck

Membro da: 09/12/23

148 Reputazione

0 commenti