Maytag MF D2561KES Water Filter Replacement

Scritto Da: Rocco Ali
  • Commenti: 0
Maytag MF D2561KES Water Filter Replacement

Difficoltà

Easy

Passi

7

Tempo Necessario

5 - 10 minuti

Introduzione

This guide will show you how to replace the water filter on a Maytag MF D2561KES refrigerator. It is recommended that the water filter be replaced every six months. Drinking unfiltered water can be potentially unhealthy and sometimes it tastes bad. Learning how to replace your water filter and using filtered water with a reusable water bottle is more cost effective and will save the environment. Reducing plastic water bottle usage is a great goal and this maintenance is very easy to do!

  1. GHFH2dtbmwuA2OpY
    GHFH2dtbmwuA2OpY
    KQ3npjXVJGKxdxDS

    • Locate your water filter in the fridge.

    • On this fridge, it will be located above the top shelf on the right hand side.

  2. GgBQ1v6YRlWGnGWS
    GgBQ1v6YRlWGnGWS
    rgvV5o3ONUG2AxxP

    • Make sure that the water filter you purchased is recommended for your refrigerator brand.

    • Open the filter container. using the push button

  3. QitRWE14W5Yw32Bo
    QitRWE14W5Yw32Bo
    Li4tYTNHA5jhx5Xw

    • Twist the filter slightly to the right.

    • It is important that this is done gently, since it could be easily broken.

  4. FfIqUaAHS1rLhwDp

    • Remove the old water filter and drain the excess water in the filter into the sink.

    • The filter could be disposed by being placed in the regular garbage.

    • Extra water should be dumped into the sink before it is thrown away.

  5. PVtCsVAH2C3MrEeY
    PVtCsVAH2C3MrEeY
    Pq1Jq4LUaAJwV4IK

    • Install the new water filter by screwing it into the nozzle.

    • Twist in the opposite direction that you used to take out the filter.

  6. 3E1ITNqhVlKCHcu3
    3E1ITNqhVlKCHcu3
    mhoDqPIEUxFSZSHy
    KQXqi1EWNx6h1jum

    • Place the new filter back in the containment unit.

    • Make sure it it tight and the top is closed for the filter to work properly.

    • Throw out the first tray of ice made after changing the filter.

  7. H2LK1KoDcUYWJGwA
    H2LK1KoDcUYWJGwA
    ueMaGJrVMEybF55m

    • Get a large container and press the water button and hold it for roughly 60 seconds.

    • Make sure to dump this water in the sink, since it would be not safe to drink.

    • After the water has been run for 60 seconds the water is again filtered and ready to drink.

    • It should make a odd sound when used for the first time. This is perfectly normal, and will stop making that sound after the first time it is used. It is air in the system and will stop once the water filter is full of water.

Conclusione

Here is how you can replace a water filter for a refrigerator. Removing the filter could just use the first 4 steps.

Autore

Rocco Ali

Membro da: 10/05/21

145 Reputazione

0 commenti