Mi-T-M Heater MH-0190 Spark Plug Replacement

Scritto Da: Sam Omiotek
  • Commenti: 0
Mi-T-M Heater MH-0190 Spark Plug Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

10 - 30 minuti

Introduzione

Follow this guide to replace the spark plug on a Mi-T-M heater model MH-0190-0M10.

  1. YRbIqSAM36IanG1s
    YRbIqSAM36IanG1s
    YiwWQ4jHxTGCAfbx

    • Power off the machine at least one hour prior to starting repairs. Ensure the machine is completely cool to the touch.

    • Flip the power switch into the OFF position.

    • Unplug any extension cords from the included power cord.

  2. BCnDXObnU4aLlUnw
    BCnDXObnU4aLlUnw
    FLPeVeegkam51uFt

    • Use a 5/16 inch socket or Phillips screwdriver to remove the eight screws securing the upper shell, four on each side.

  3. g3goHXdvbgJkfYnr
    g3goHXdvbgJkfYnr
    kk5TiRy4kNpsgEAK

    • Lift the upper shell straight up off of the machine to remove it.

  4. MPyKLFQYVaPDWUEJ
    MPyKLFQYVaPDWUEJ
    J4j4vm2NO1uALt6P
    2arolyeYuymxfy2G

    • Grab the spark plug wires by their boots and pull firmly to disconnect them from the spark plug.

  5. fRAUVXYkBlovMyYa

    • Use a 5/16 inch socket or Phillips screwdriver to remove the bolt securing the spark plug.

    • During reassembly, install the insulating washer against the spark plug and the lock washer against the bolt.

  6. PfTyn2FwBU3WADjT
    PfTyn2FwBU3WADjT
    rGOXYm4ZuYNYxiSU
    rPVT2OueZJ1wyaTq

    • Remove the spark plug.

    • During reassembly, insert the new spark plug with the leads angled towards the center of the combustion chamber.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Sam Omiotek

Membro da: 25/02/19

71915 Reputazione

0 commenti