Misfit Vapor Power Button Replacement

Scritto Da: Victor Vas
  • Commenti: 2
Misfit Vapor Power Button Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

15 minuti

Introduzione

If the battery on the watch is working but you are struggling to turn on the watch via the power button then it might be time to replace the power button. You will need tweezers, jaxa wrench, and and iFixit opening tool.

  1. J5ILbgBBCljwTVDx
    J5ILbgBBCljwTVDx
    MTYiupYY6V4TFqQm

    • Using your fingers, press down on the rubber circles to unbuckle the strap from itself.

    • Once you have removed two of the rubber circles from from a side you will be able to unbuckle the strap on that side.

  2. QZMpYGWpHUHn2Myy

    • Hold the side power button to ensure the watch is completely shut down.

  3. IWNPU65anYvprGZT

    • To access the battery compartment use the Jaxa-style wrench tool. Secure the midframe while you pop up the back.

    • This will require an extremely high amount of force as there is a rubber seal and the fit is tight.

    Thank you for putting this guide together. I have a Jaxa-style wrench but I am unable to find the correct wrench teeth to grip the edge; are you able to post most detailed photos and/or provide the wrench teeth that you used? Also, you have written "pop up the back" but as very best I can tell the photo is of the top of the watch, since the wrist straps are against the table

    Matthew L Daniel -

  4. 2bpSANBMRAUmSN2o

    • Remove the battery cover by carefully using tweezers or the iFixit opening tool.

  5. rvvxqBdpWlCvwwVt

    • Disconnect the small ribbon cable connector.

    • Remove the battery from the watch.

    I tried searching online for the GREPOW 1ICP4/36/30 without much luck; do you have a vendor where you've had good luck finding these specialized batteries?

    Matthew L Daniel -

  6. 5sCk2AgNJ2qxYxjv

    • Use the tweezers to gently push out the button from the frame of the watch.

    • Be careful not to lose any springs or other components that the power button is with.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Victor Vas

Membro da: 20/03/23

219 Reputazione

0 commenti