Motorola Moto 360 3rd Gen Power Button Replacement

Scritto Da: Gage Kosnik
  • Commenti: 0
Motorola Moto 360 3rd Gen Power Button Replacement

Difficoltà

Moderate

Passi

6

Tempo Necessario

10 - 20 minuti

Introduzione

If your Motorola Moto 360 3rd Gen smartwatch power button is not responding, you can use this guide to replace it. Before using this guide, inspect the power button, make sure that there is no dust build up. Dust build up can cause the power button to jam. Make sure to power off your smartwatch completely and disconnect from any external power source before attempting this repair.

  1. Hx2UCBj1dHKnYEgu
    Hx2UCBj1dHKnYEgu
    OPkf3pyXL6EqWPhK

    • Use a T4 Torx screwdriver to remove the four 4.2 mm screws securing the lower case.

    • Gently pry the case open with a halberd spudger if the case will not release after removing the bolts.

    • Do not remove the lower case completely yet; this could damage cables connected to the lower case.

  2. mqacXNVYXjbUrr65

    • Raise the cover without straining the connected ribbon cable.

    • Disconnect the ribbon cable from the motherboard with a halberd spudger.

  3. JQSSWSpvDVS46Xil
    JQSSWSpvDVS46Xil
    NLjNwRGUGWAOiQD1

    • Disconnect the right (small, black head) and bottom right ribbons (wide, orange head).

    • No need to disconnect the left or bottom left ribbons.

  4. m1AYEWfAjL1tSK6V
    m1AYEWfAjL1tSK6V
    3ZGkMrdCQECGJNCG
    2UPSEnuYUYTTLKKG

    • Gently remove the motherboard using the spudger tool.

    • The best area to pry is at the bottom of the motherboard, right under one of the ribbons that was just disconnected.

  5. aB1dfpFtIRUbJVA6
    aB1dfpFtIRUbJVA6
    lqHiWnmMKZgnttkG

    • While pushing the power button inwards, use tweezers to remove the c-clamp.

    • The c-clamp is a very tiny object; be cautious of losing it.

    • Remove the power button.

  6. UrWNSBwMRc4YVrmZ
    UrWNSBwMRc4YVrmZ
    gRGM5ZjEyFVPJk4R

    • Insert the new power button in place of the old power button.

    • Attach the c-clamp back around the power button while it is being pushed inwards.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Gage Kosnik

Membro da: 14/02/23

118 Reputazione

0 commenti