Motorola Moto Z2 Force Battery Disconnection

Scritto Da: Tarun Thiruma
  • Commenti: 0
Motorola Moto Z2 Force Battery Disconnection

Difficoltà

Moderate

Passi

3

Tempo Necessario

Nessuna stima

Introduzione

Pre-req only guide on disconnecting the battery on your Moto Z2 Force for futher dissassembly.

  1. XtYTA4DOOPfit6ic
    XtYTA4DOOPfit6ic
    XTFVGHxPgByZtcRw
    4XZjSqHEBbWuMAWQ

    • Use a pair of tweezers to remove the two black pieces of tape securing the battery.

    • Take care to keep these tape pieces intact so they can be reused.

    • While not crucial, this tape helps dissipate heat from the battery. They won't stick back down by themselves, but if the tape pieces are still mostly intact, re-attach them with some adhesive during reassembly.

  2. V3cB3Pb6ihqx4YEh
    V3cB3Pb6ihqx4YEh
    OkP1Z5YvQWfSugGN
    w5JeHIflBvABiKp3

    • Use an opening pick to pry up the small black bracket covering the battery connector. It is secured with a small bit of adhesive.

    • Use a pair of tweezers or your fingers to remove the bracket.

  3. DE2PH1Wj4XXWhXRV
    DE2PH1Wj4XXWhXRV
    R2ooKW1vXUThnrLY

    • Use a spudger to pry up and disconnect the battery connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tarun Thiruma

Membro da: 20/11/19

35174 Reputazione

0 commenti