Moultrie I45 GameSpy Casing Replacement

Scritto Da: Sean Hill
  • Commenti: 1
Moultrie I45 GameSpy Casing Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

Nessuna stima

Introduzione

This guide details how to remove the camera's case.

  1. BwvcMvGqLrOUAhZZ

    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

    make sure to add commas.

    Step 1- remove the 8, 6mm...

    Step 2- Using a philips head screwdriver, remove the 6, 4mm screws...

    Same thing with step 6. Good page!

    Jesica Bartell -

  2. SQXniMkER5vXGpHx

    • Remove the butterfly nut from the lid arm.

  3. iL5KTccQPcT4Sixf

    • Remove the lid-covering.

  4. rH3u6SDRySbXMnkp

    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. FVk6w2GKwx5vjQRj

    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Sean Hill

Membro da: 30/01/15

485 Reputazione

0 commenti