Mouse middle button replacement on Asus ROG Gladius II

Scritto Da: cassisbonbon
  • Commenti: 0
Mouse middle button replacement on Asus ROG Gladius II

Difficoltà

Moderate

Passi

8

Tempo Necessario

45 minuti

Introduzione

In case the middle button of the ROG Gladius II stops working properly (the click only gets registered some of the time), the button can be replaced.

  1. wXhx2FwKYivpN4gv
    wXhx2FwKYivpN4gv
    GlteEbyBHVHolj2S

    • Remove the screw taps, and then the screws themselves.

  2. O4OWlalvMnmVulXP

    • Open the mouse

  3. EXNpQtHwmuBcexAa
    EXNpQtHwmuBcexAa
    USrP6mNOJVlwwwxF

    • Remove the four screws holding the wheel assembly

  4. CZOLGO1NTQej4lsO
    CZOLGO1NTQej4lsO
    3rfICaCuZjQdd25L

    • Remove the wheel assembly

    • remove the RGB lights from within the wheel

  5. lKIFYq3upLLwdG3l
    lKIFYq3upLLwdG3l
    2SPKlIRLsUjqqGsk

    • Remove the wheel from the wheel assembly

  6. TlkBF4tSfe52wb31
    TlkBF4tSfe52wb31
    j5lTLI1ZUVABR11D

    • Unsolder the button (on the opposite side of the rotary encoder)

  7. HNdDydZu6421Ef1g
    HNdDydZu6421Ef1g
    raf6kSdQQdgdLCST

    • Place the new button and solder it

  8. eHvbVShMhdCSENWR
    eHvbVShMhdCSENWR
    w2atnYS22E3FSfie

    • The result can be checked for connectivity

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

cassisbonbon

Membro da: 03/02/24

172 Reputazione

0 commenti