Nest Thermostat E Base Plate Replacement

Scritto Da: Andrew Ahlborn
  • Commenti: 1
Nest Thermostat E Base Plate Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

5 minuti

Introduzione

Replacing the base plate for your Nest couldn't be easier. The only tool required is a Phillips #2 screwdriver

  1. VoBiLwSNxKWSFNNp

    • Grasp the display's outer ring with your fingers and pull directly away while rotating clockwise to remove the thermostat from the wall.

    • Go to the electrical panel and turn off the circuit to make sure no power is running to the thermostat.

    • Once the power is off, disconnect the Y1, G, R, W1, C, and OB wires.

    • Remember the placement of each wire for reassembly.

  2. EopR1DJBuaSoJZhH

    • Remove the two 1 ¼” drywall screws holding the base display and base plate in the wall using a Phillips #2 screwdriver.

    • Remove the base plate and base display.

  3. AJTXCDgMdeSSq3xX

    • Pry the base display off of the baseplate using an iFixit opening tool.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Andrew Ahlborn

Membro da: 27/02/23

368 Reputazione

Un commento

Any recommendations on where to get 2nd and 3rd gen base plates. Both burned by lightning...

elippert -